Friday, April 12, 2013

Brioche

So I see that Brioche is something the loom knitters really want to know. It's fairly simple and easy to crack. I have a few pictures that I hope will help you loom knit brioche. All you have to remember to make your basic brioche stitch is yarning over (YO) and knitting, alternating the pegs where your YO are each row. You can look at these tips for knitting in the round or knitting panels.   I also have some tips, to help loom knitters interpret brioche stitch patterns from regular needle knitters.

My pictures are assuming you are always knitting in the same direction (aka knitting in the round).  However, read the steps over and look at the pictures.




Step 1: Cast On
1. Cast on.
Nothing to be said here.




Step 2. * sl1 (do not knit) yo, k1, *
2. Prep row.
a. Do not knit your first peg, but yarn over. Make sure that it is not an e-wrap YO. Make sure your YO looks like the picture below.
b. Knit over the second peg.
c. Repeat a and b for the whole row.



Tip: YO.
TIP: YO
The second peg is a YO. This is a bad picture... I know, but make sure you're not e-wrapping.




Step 3. *BRK1, sl1 yo, *
3. First brioche row!
a. If you remember, you left peg 1's stitch on and did a yarn over. Therefore you had 2 loops on peg 1.  Knit  loops over. Now peg 1 has only one loop on it. That is a BRK (brioche knit).  See the next picture for a BRK.
b. Now, do not knit peg 2, but YO.
c. Repeat a and b.



BRK - Brioche Knit. So simple.
TIP: BRK
The yellow coloured peg is about to be knitted over. The bottom loop is the stitch that you left alone, and the top loop is the YO you did the previous row. Knitting over will leave you with the new loop!




Step 4. * sl1 yo, BRK1

4. Second Brioche Row! Doesn't this look familiar? Except...
a. Do not knit over peg 1, but YO.
b. If you remember the last row (and you will, if you are working on your knit while you are currently reading this), you peg 2 had 2 loops on it. You know what that means by now (hopefully). Knit them over (BRK).
c. Repeat step a and c.


5. Repeat the pattern.
You keep repeating step 3 and 4. And voila! You should have your brioche stitch.




Extra tips:

  • Panel knitting - It's really up to you to start your prep row with a yarn over, or to knit your first peg. It is also up to you whether or not you want an even or odd number of stitches, but your edges will be the same if you have an odd number of stitches.
  • Working this pattern in colour - Stripes, anyone? To do this, still follow the same steps BUT remember that each peg uses the same colour yarn each row.
  • Creating variations of the brioche stitch are by using alternate positions of YOs and BRKs. So, you should be able to learn new stitches.  For example, one step of the brioche stitch written is "yf sl1, yo, brk1". You do not need to know "yf sl1" because it means yarn forward, slip one, yarn over for needle knitters. Just know that for a loom knitter, it means that you do not do anything for that peg except yarn over, so that there will be two loops on the peg, and then BRK the next peg.
  • However, some brioche stitch variations do not look as eye-catching as they do when you use needles for knitting. This is because you will always have the same amount of tension on pegs. I've tried the pearl brioche stitch on a loom, and it doesn't look as nice. 


Please tell me if you have trouble panel knitting brioche!

Thursday, January 17, 2013

Tiled Blanket pattern


New pictures - smaller but better!
The right side up close. It's quite pleasant!

I made this blanket for my aunts' Christmas present. I actually tiled the blanket, but it ended up taking really long to sew, so this is my amended version, and I hope it works. Please change this pattern to see fit to how you like it. Always knit a swatch and block it before going ahead of this project, because it uses a lot of yarn.  This is not a double knit! It requires knitting back and forth on the loom. I took the pattern from knitting on the net squares in squares stitch. I tried to mimic the pattern in 3x3 squares in squares. I would say this is an intermediate pattern, but it really isn't. It's just that it is a tedious pattern and you need to be committed to it to finish it; the hours are long, but you have something very warm at the end. You also must be comfortable at purling stitches, and you will need to block each panel.

Onto instructions, patterns and extra links


You can also mark your progress on this project on Ravelry.

Items you need for knitting:
  • 36-peg round loom (knifty knitter, loops and threads, and the large wal-mart looms are all the same)
  • bulky yarn - I used 3 300g balls of Bernat's Chunkee Ombre in Wedgewood - they are considered 6, super bulky, so you can double up worsted yarn or find another bulky yarn
  • sewing needle

Pattern for each panel:
Cast on using any sturdy cast-on (do not use e-wrap knit over cast-on) on 32 pegs.
Row 1 and 2: Knit.
Row 3 and 4:  Knit 2, *purl 8, knit 2, repeat from *.
Row 5 to 10: Knit 2, *purl 2, knit 4, purl 2, knit 2, repeat from *.
Row 11 and 12: Knit 2, *purl 8, knit 2.
Row 13 and 14: Knit.
Row 15 and 16: Purl.
Repeat pattern (Row 1 to 16) 3 more times, and then repeat the pattern from row 1 to 14 once.
Cast off.

In total you should have 5 "tiles" of the square repeats. This is one panel.

Make 3 of these panels altogether, block them, and sew them together.


Links that should help:

Sewing - I used the mattress stitch - which means that you will notice the seam on the wrong side - it's not that bad looking, but you can also think about slipping the side stitch when you start the next row and sewing it in a different manner. Do not be scared of trying it out (though I would recommend you making 2 small samples of the pattern and then sewing them together). I avoided sewing like the plague, but this is easy, straightforward and fun! It may require for you to look at more than one website - to complete the picture in your mind on how to do it.


Blocking - Acrylic requires heat to block. If you don't block this big project, it will be all wavy - the easiest way is to throw your project in the dryer since this project is pretty big.



Have fun, and if you have any questions, please ask! I must remind you this is a very time consuming project, and that patience is very important (to finish this project). It took me 8 days to make. This was also because I knit in squares, and then had to learn how to sew them together (which I regret a bit - I messed up a billion times).




The wrong side also looks really nice! My sister liked the wrong side more.




Tuesday, January 15, 2013

Happy New Year! I am late

Hi everyone! I have been so busy lately I haven't been able to post. My research project took up a whole chunk of my time, and after that, I was working on finishing my Christmas presents! And now a new (and hopefully) final semester has come

I only have big looms, so I had to nix the idea of making everything using a loom, since chunky knits can use up a lot of yarn. Don't judge. I gave away 29 presents to my family members this year, although most of them were not knitted products! I am not even including acquaintances here.

Baby keyhole knit scarves, style a la anthropologie
I messed up the purple cast off (which I later fixed). The difference in size is because one baby is older than the other.  I'm sure you can make something similar on the loom, but the stitches would be bigger.


Loom knit lap throw

Mattress stitching this baby up. The giftees love colour. I regret that I could not do this project in one colour - this was the only bulk yarn with 3 rolls left during holiday time... but they still like it. It's super warm. (The next post shall be...)
I did use a loom! I made a tiled blanket of a squares pattern for my aunts.  Unfortunately, I should have thought ahead and made 3 long panels. I ended up making 15 squares for the blanket and sewing them together. I actually like sewing...but the weaving in the ends was the most annoying part. I'll probably post a pattern later in the week. Acrylic is a pain to block, and I unfortunately finished the blanket too late to be able to throw it in the washer and dryer...so hopefully they'll do that to straighten it out.


Some other news: I will be having a minimum post a month.  They may not be tutorials or anything...but possibly even projects I did, because those posts take up less time. Fingers crossed that I will be able to do my schoolwork and post and volunteer. I also apologize for the photos taken from my cell. I totally regret that.